Panasonic FP7 User Manual page 134

10.4 Setting of Positioning Function
4.
Select a function setting and press the [[OK]] button.
The input and output of the positioning function will be allocated. A maximum of four
channels can be allocated. Allocated channel numbers are fixed.
Function setting
Not used
Used
Used
(Use J-point terminal)
(Only CH0/CH1)
10-18
Content
The positioning function is not allocated.
The input and output of the positioning function including near home input are
allocated.
The input and output of the positioning function including J point control positioning
start input are allocated.
WUME-FP7MXY-06