Setting item
Counter upper/lower limit
values
Pulse start logic (Except
PWM output)
■
Positioning (CH0-CH3: Selectable by channel)
Setting item
Function setting
Counter elapsed value
Counter upper/lower limit
values
(Note 1)
Use (Use J point terminal) is only for CH0 - CH1.
● For details of the pulse output/PWM output function, refer to page "P.9-2".
● For details of the positioning function, refer to page "P.10-3".
WUME-FP7MXY-06
Settings
-2147483648 to +2147483647
OFF start / ON start
Settings
Unused/Use/Use (Use J point terminal)
-2147483648 to +2147483647
-2147483648 to +2147483647
5.3 Application Setting
(Note 1)
5-11