Function Specifications (Afp7Mxy32Dwd/Afp7Mxy32Dwdh) - Panasonic FP7 User Manual

13.1.2 Function Specifications (AFP7MXY32DWD/AFP7MXY32DWDH)

Item
No. of external
inputs/outputs
No. of occupied
inputs/outputs
Input time constant
setting
Output polarity
setting
No. of points
Mode
Occurrence
condition
Number of channels
Counter type
Counting range
Input mode
Max. counting
(Note 3)(Note 5)
speed
Min. input pulse
width
Others
Comparison output
setting
Number of channels
Output mode
Output frequency
Duty
Number of channels
Output frequency
Duty
WUME-FP7MXY-06
Specifications
Input: 16 points, Output: 16 points
AFP7MXY32DWD: 64 points respectively for I/O (4 words)
AFP7MXY32DWDH: 96 points respectively for I/O (6 words)
0/0.5 μs/1 μs/1.5 μs/2 μs/4 μs/8 μs/16 μs/32 μs/64 μs/96 μs/128 μs/256 μs/2 ms/
(Note 1)
4 ms/8 ms
No output, Sink output, Source output, Push-pull (negative logic), Push-pull (positive
logic), Differential output
Per multi I/O unit: Max. 8 points can be set in one point increments.
Per CPU unit: Max. 64 programs (8 programs x 8 units)
Non-interrupt unit, Interrupt unit (Set with the dip switches on the side of the unit.)
Terminal input, comparison match
Max. 4 channels (Max. 2 channels when using the elapsed value hold function)
2)
Linear counter, Ring counter
Signed 32-bit integer (-2,147,483,648 to +2,147,483,647)
● Direction distinction input
● Individual input
● Phase input
When input voltage is 5 V: 500 Hz (For phase input: 500 kHz)
When input voltage is 12 V: 500 kHz (For phase input: 350 kHz)
When input voltage is 24 V: 250 kHz (For phase input: 180 kHz)
0.5 µs
Multiplication function (multiplied by 1, 2, or 4)/Elapsed value offset/preset function,
Elapsed value hold function, Counter upper and lower limits setting, Overflow/
underflow detection (only when setting the linear counter)
Input pulse frequency measurement
(Note 2)
Max. 8 points
(4-point external input counters and 4-point pulse output counters can be arbitrarily
compared using 1 point.)
Max. 4 channels including PWM output
Direction distinction, Individual output, Phase output, Comparison match stop
0 to 500 kHz (Settable in 1 Hz units)
Approx. 50% (Fixed)
Max. 4 channels including pulse output
0 to 100 kHz (Settable in 1 Hz units)
0 to 100% (Settable by 0.1%.)
(Note 1)
(Note 2)
(Note 4)
(Note 2)
(Note 4)
13.1 Specifications
(Note 2)
(Note
13-3