Panasonic FP7 User Manual page 49

Item I/O no.
Y38-Y3B
Y3C-Y43
Y44
Y45-Y47
Y48-Y4F
Y50-Y55
Y56
Y57-Y5F
(Note 1) The I/O numbers actually allocated are based on the first word number allocated to the unit.
Example) When the starting word number for the unit is ""10"", output contacts are numbered starting
from Y100.
● For details of I/O allocation information, refer to
4.1.3 Registration in I/O Map
Before setting parameters, register the unit to be used in the I/O map. The following procedure
shows an example when FPWIN GR7 has been started and the CPU unit has been already
registered as the slot number 0 and the multi I/O unit is allocated to the slot number 1.
1.
Select Options>FP7 Configuration>I/O map in the menu bar.
The "I/O Map Setting" dialog box is displayed.
2.
Double-click a desired slot.
The "Unit Selection" dialog box is displayed.
3.
Select the unit name to use in the "Select unit to use" field, and press the [[OK]] button.
WUME-FP7MXY-06
Functions
Positioning (Home return start)
Positioning (JOG operation start Forward/Reverse)
Positioning (System stop)
(Reserved for system)
Positioning (Emergency stop, deceleration stop)
Positioning (J-point control positioning start input, near home input, J-point
control speed change)
Positioning (Error clear)
(Reserved for system)
""13.2 Allocation of I/O
4.1 Unit Allocation
Numbers"".
4-3