Panasonic FP7 User Manual page 137

2.
Select Channel setting>Used channel setting from the menu bar.
The ""Used channel setting"" dialog box is displayed.
3.
Select the control method for the used axes, and press the [[OK]] button.
In the initial condition, the allocated channel numbers are selected for single control.
To select interpolation control, check the box of "Interpolation".
When the setting is changed, a confirmation message box will be displayed.
Press the [[Yes]] button. The changed setting will be reflected on the setting screen.
WUME-FP7MXY-06
10.5 Positioning Table Settings (Configurator PMX)
10-21