Setting The Sewing Foot Stroke - Dürkopp Adler 868-M Operating Instructions Manual

58
Information
The maximum speed for 2-needle machines with a needle distance
greater than 20 mm must not exceed 2,000 min
Important
ECO machines do not have automatic reduction of the number of
stitches. On ECO machines, you as the user must ensure that the
number of stitches specified in the technical data is not exceeded
( p. 149).

4.11.2 Setting the sewing foot stroke

NOTICE
Property damage may occur!
Machine can be damaged if the adjusting wheels are forced.
The machine is designed in such a way that the sewing foot
stroke at the right adjusting wheel cannot be set to a lower
level than at the left adjusting wheel.
Do not attempt to use force to set a smaller sewing foot
stroke at the right adjusting wheel than at the left adjusting
wheel.
Depending on the equipment the machine has 1 or 2 adjusting
wheels for the sewing foot stroke. The sewing foot stroke is
continuously adjustable over a range of 1 – 9 mm by turning the
adjusting wheel.
Important
The increased sewing foot stroke must NOT be lower than the
normal sewing foot stroke. Always set the sewing foot stroke at
the right adjusting wheel so that it is at least as high as the sewing
foot stroke at the left adjusting wheel.
On machines with only 1 adjusting wheel, the highest stroke of
9 mm is automatically activated as the increased sewing foot
stroke by pressing a button housed in the push button panel.
Operating Instructions 868-M - 01.0 - 12/2020
Operation
-1
.