Multi Out 1–24 Button; Flex Bus Master 1–12 Button; Fader Group Master 1–24 Button; Multi In Ch 1–24 Button - Roland VM-C7100 Owner's Manual

Chapter 1 Introduction
8...MULTI OUT 1–24 button
Press this button to control the level of the 24 (eight channels times three) digital
multi-outputs using the channel faders or from the display. Press this button
together with [SHIFT] to call up the MIDI control screen.
9...FLEX BUS MASTER 1–12 button
Press this button to control the output level of the 12 Flex buses (p. 86) using channel
faders or from the display.
10...FADER GROUP MASTER 1–24 button
Press this button to control the master level of each of the 24 fader groups (p. 104)
using the channel faders or on the display.
11...MULTI IN CH 1–24 button
Press this button to control the 24 (eight channels times three) MULTI IN digital
multi-inputs on the processor.
12...INPUT CH 1–24 button
Press this button to control the 24 INPUT channels—typically used as analog
inputs—on the processor.
13...CH 13–24 button
Available on the VM-C7100 only.
Press this button to activate control of the latter 12 channels (Channels 13 to 24).
This button is not available on the VM-C7200 since it has 24 channel faders.

13...CH FLIP button

Available on the VM-C7200 only.
When [ON DISPLAY] is active and the faders are controlling input channels, press
[FLIP] to assign the faders to the control of the multi-in channels. If [ON DISPLAY]
is lit and the faders are controlling multi-in channels, pressing [FLIP] will assign
them to the input channels. The VM-C7100 has no button for this function.

14...SHIFT button

When [SHIFT] is held down, buttons with dual functions—as shown in green
typeface—perform their secondary function.
18