Saving An Effect State (Effect Library) - Roland VM-C7100 Owner's Manual

Saving an Effect State (Effect Library)

You can save up to 200 edited effects in the main unit as user libraries (U000 to
U199) (p. 43). To save the user libraries, use [F3] (SAVE) on the Select Library screen.
Saving edited effects as user libraries (SAVE)
1. Return to the Effect menu screen.
After you have edited effects, you can return to the menu screen by pressing [PAGE
UP] repeatedly in the [PARAM-1] and [PARAM-2] pages on the Edit screen.
2. Open the library list.
Press LIBRARY on the menu screen for the desired effects. ([F1], [F3] or [F5]. [F1] for
the master effect.) (For effects 1 to 8, make sure the cursor is in the column of the
effect that was edited before pressing the relevant button.)
3. Select the user library in which the effects are to be saved.
First, turn the V1 knob (SELECT GROUP) clockwise to select U (User). Then turn the
V2 knob (SELECT NUMBER) to select a number (000 to 199), referring to the library
names appearing in the window. Since the names of effects indicated as "------------"
in the list appear near the icon on the right the screen, you can easily confirm them.
4. Carrying out Save
After selecting the library, press [F3] (SAVE) and then [F5] (ENTER) to save it (the
previously saved setting will be erased and cannot be restored).
fig.08-008
5. Press [F6] (EXIT) to close the list.
You cannot carry out the following operations unless you press [F6].
Chapter 8 Using the Internal Effects
When you want to change
a library name before
saving it (p. 118)
Pressing [F1] (PREVIEW) to
turn it on (displayed in
reverse video) allows you
to hear the settings
previously saved in the
selected library (it must be
turned off before saving).
117