Selecting Which Parameters Will Be Recalled - Roland VM-C7100 Owner's Manual

Chapter 3 Data Storage and Retrieval

Selecting which parameters will be recalled

Hold [SHIFT] and press [SCENE] (this is the same as pressing [EDIT]) to open a
screen for detailed Scene-related settings. Every time [PAGE DOWN] is pressed,
screens change as shown below, allowing you to select the parameters to be recalled
with the Scene switching.
SCENE SELECT/ACTIVE PARAMETER page
fig.03-04
• Positioning the cursor on the upper section of the screen enables a Scene for
recalling ([F1]), clearing ([F2]) or storing ([F3]). The Scene number can be
selected while checking the name (explained below) using the V1 knob
(SELECT).
• Positioning the cursor on the lower section of the screen enables you to access
the active parameters using [F1] to [F6] (black highlight indicates that the Scene
is valid).
SCENE ACTIVE CHANNEL page
fig.03-05
48