Directly Jumping To A Parameter's Screen (Quick Channel Edit) - Roland VM-C7100 Owner's Manual

Directly jumping to a parameter's screen
(Quick channel edit)
Using [PAGE UP] or [PAGE DOWN] to move through numerous parameter screens
in order to reach a desired parameter's screen can be time-consuming. To save time,
you can jump directly to certain parameters using the status buttons of channels 13
to 24. While holding down [CH EDIT] on the channel you're working with, press one
of the status buttons to display the desired parameter screen.
fig.04-08
Channel Parameter setting screen
13 (1) Preamplifier-related setting
14 (2) Delay-related setting
15 (3) EQ (gain)-related setting
16 (4) EQ (low-range, high-pass filter)-related setting
17 (5) EQ (mid-range)-related setting
18 (6) EQ (high-range)-related setting
19 (7) Setting of signals to be sent to Flex Buses 1 to 6
20 (8) Setting of signals to be sent to Flex Buses 7 to 12
21 (9) MULTI OUT-related setting
22 (10) Surround depth-related setting
23 (10) Setting of signals to be sent to main/Cue buses
24 (12) General channel parameter list screen
* A bracketed channel number indicates that the VM-C7100 console is used.
Example: [CH EDIT] + [CH VIEW]
fig.04-ChView
Chapter 4 Useful Functions
The CH EDIT VIEW screen
allows you to set all the
channel parameters
including the transmission
level to the respective
output channels, pre-amp,
and feedback delay
simultaneously.
63