Settings Related To Tempo/Metronome - Roland VM-C7100 Owner's Manual

Settings related to tempo/metronome

[SHIFT] + [PROJECT]
fig.12-11
1
2
1
TEMPO/BEAT
TEMPO determines both the tempo at which the metronome sounds, and the tempo
used when sending MIDI clock to an external device.
BEAT determines the beat.
2
MIDI METRONOME
Settings for the metronome.
MODE
Determines when the metronome is to be sounded.
REC ONLY:
REC&PLAY:
ALWAYS:
NORMAL
ACCENT
Determines the pitch (NOTE) and volume (VELO) to sound the metronome. ACCENT
sets the first beat while NORMAL sets the subsequent beats.
MIDI CH (MIDI channel)
Determines which MIDI channel to use to sound the metronome. It is usually set to
"Channel 10" which plays a rhythm set.
CURSOR [DOWN] [F5] (TEMPO/METRONOME)
Metronome sounds for automix recording
Metronome sounds for automix recording and playback
Metronome always sounds
Chapter 12 Using with MIDI Devices
Connect a sound generator
to MIDI OUT to sound the
metronome. The parameter
is initially set for a GS
sound generator.
223