The Internal Effects; Midi-Related Problems - Roland VM-C7100 Owner's Manual

V-mixing console
Hide thumbs Also See for VM-C7100:
Table of Contents

Advertisement

Troubleshooting
Intended operation is not available from the fader.
Stereo link is formed between adjacent channels.
You cannot operate stereo-linked channels individually.
The fader tries to operate MULTI-OUTs 17 and 18.
MULTI-OUTs 17 and 18 can be varied using the STUDIO1 LEVEL knob alone,
not by the fader itself.
[On Display] is turned on (lit).
As long as the light is on, the parameter selected from "parameter view on
fader" is not reflected on the fader.
Writing to the memory card is not possible.
The card is not formatted.
You have neglected to create a new project or to select a current project before
starting the operation.
One of them must be implemented before storing data.
The memory card has insufficient space.

The internal effects

The effects are unusable.
The VS8F-2 is not appropriately mounted.
Effects 2, 4, 6 or 8 is attempting to select an illegal algorithm (p. 112).
Or the algorithm is used by a preceding effect (p. 112).

MIDI-related problems

When the console is selected as the master, external MIDI device
does not operate according to the information provided.
Improper setting of the external MIDI device.
The external MIDI device is not ready for play.
The device is not connected properly.
The MIDI cable is disconnected.
"Out" is not selected for the MIDI connector (p. 222).
Currently selected console settings do not allow it to send out a MIDI clock or
MTC (p. 224).
A different type of MTC is used (MTC synchronization is employed).
When the external MIDI device is selected as the master, the
system does not operate according to the information provided.
The device is not connected properly.
The MIDI cable is disconnected.
Synchronization using the MIDI clock is tried.
Slave operation is only available when MTC is used.
The same type of MTC is not being used by both devices.
Improper setting of the external MIDI device.
MTC is not properly received.
The situation may be improved if the currently selected ERROR LEVEL is
changed (p. 224).
262

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vm-c7200

Table of Contents