Table of Contents
Advertisement
Other Features
Initializing the Settings
---Restoring the M-1000 to Its Original Factory Conditions
You can use the following procedure to reset the settings to the default factory
condition.
1.
Set the SELECT switch to OPTICAL.
2.
Hold down the CLOCK SOURCE button and switch on the power to the
M-1000.
This resets the settings to their factory values.
Clock Source:
Internal Clock Sampling Frequency:
USB Driver Mode:
Sampling Frequency w/USB Connection:
Changing the Signal Path for the Analog Output (MIX OUT)
- If the audio in the inputs is doubled in the output when using the USB connection -
The M-1000's internal signal
routing incorporates a switch
called [MIX OUT].
Normally, sounds input to the M-
1000 are output both through the
USB connection and the MASTER
output, but you can change the
[MIX OUT] setting to block the path from the analog input to the MASTER output.
When using the M-1000 in combination with another mixer, the way the connections
are made and the mixer is structured can cause sounds to be output twice. This
occurs in the following cases.
When connected via USB, the [MIX OUT] setting (Connect/Disconnect) is enabled.
When not connected via USB, [MIX OUT] remains connected at all times.
* Settings are saved even when the power is turned off.
Disconnecting the Path from ANALOG INPUT to MASTER OUT ([MIX OUT] off)
The analog input is transmitted only though USB.
Hold down the SAMPLING FREQ button for at least one second.
The [96kHz], [48kHz], and [44.1kHz] indicators light for one second, indicating that the
path from ANALOG INPUT to MASTER OUT is disconnected.
Connecting the Path from ANALOG INPUT to MASTER OUT ([MIX OUT] on)
This is the normal setting. The analog input is sent both to the USB connector and
MASTER OUT.
Hold down the CLOCK SOURCE button for at least one second.
The [ADVANCE], [96kHz:fromPC], and [96kHz:toPC] indicators light for one second,
indicating that the path from ANALOG INPUT to MASTER OUT is connected.
18
INT (Internal Clock)
44.1 kHz
Standard Driver Mode
44.1 kHz
USB
ANALOG IN
MIX OUT
MASTER OUT
Advertisement
Table of Contents
