Storing And Recalling All Mixer Settings (Project) - Roland VM-C7100 Owner's Manual

Chapter 3 Data Storage and Retrieval

Storing and Recalling All Mixer Settings (Project)

A memory card may be able to hold more than one project.
IMPORTANT... Please read the following notices:
• In order to successfully save a project on a card, the following steps are required
before starting a new operation. Otherwise, a project cannot be stored.
1. Prepare a formatted memory card (p. 51).
2a. Create a new project on the card (p. 52).
Or,
2b. Select a project on the card whose contents are to be changed (p. 52).
• Since projects are updated by overwriting them, your current settings cannot be
stored in more than one project. To store several states of a project, use the
Scene-memory function (p. 47).
• Once the project-storing operation has started, do not select another project
without completing the storage procedure. After a project is selected (p. 55), the
current project is changed to the new one and the old project's current settings
are will be lost.
About the write protect function of the memory card
The Write Protect function protects data stored on the memory card from accidental
erasure. You should affix a supplied Write Protect Sticker onto the Write Protect
Area whenever you do not intend to write data on the memory card.
fig.3-0001
* When affixing the sticker, make sure that it is properly positioned over the Write
Protect Area.
* Affix it securely, so it will not come off. Should they come loose inside the slot,
the card could get stuck.
* Do not use any stickers other than the supplied ones.
* If the sticker is dirty, the Write Protect function may not work properly. When
the sticker gets dirty, clean it with a soft dry cloth.
50
Write
Protect Area
The number of storable
projects differs depending
on the card used. For
example, only one project
can be stored on a 2 MB
card.
A memory card to use with
this system is SmartMedia
used for the digital camera
as well and so on.