Linking Stereo-Link-To Destination - Roland VM-C7100 Owner's Manual

Chapter 7 Mixing Procedure 3 (Settings Common to Input and Output)

Linking stereo-link-to destination

When a stereo image is spread across two channels, you can use the stereo-link
feature to solo or mute the two channels as a single entity, using a single SOLO or
MUTE button.
1. Press [FADER UTILITY].
The FADER UTILITY MENU appears.
2. Press [F1] (CHANNEL LINK).
3. Press [PAGE UP] or [PAGE DOWN] to display the channel-linking screen.
Linking can be set for the following:
• Input Channels 1 to 24
• MULTI IN Channels 1 to 24
• FlexBus Channels 1 to 12
4. Press CURSOR [UP] or [DOWN] to select the desired set of six channels.
5. Press [F1] to [F6] to turn on the desired channel's stereo-linking—when
linking is active, the channel is highlighted.
To disable linking, press [F1] to [F6] again.
108