Table of Contents
Advertisement
Fading the program output video in/out
Here's how to perform a fade-out from the program output video to a
black screen, or a fade-in from a black screen to the program output
video.
* The program output video and audio fade in/out simultaneously.
* The fade-in/out effect is applied only to the program output.
1.
Press the [OUTPUT FADE] button.
The program output video fades out to a black screen.
When fade-out is complete, the [OUTPUT FADE] button lights up.
2.
To fade in, press the [OUTPUT FADE] button again.
The [OUTPUT FADE] button blinks, and program output begins.
When fade-in is complete, the [OUTPUT FADE] button goes dark.
MEMO
¹ The time required for fade-in/out is determined by the video
transition time setting.
¹ You can assign the freeze function to the [OUTPUT FADE] button
to temporarily freeze or pause the program output video.
Set "Output Fade" to "Freeze" from the <Video> tab on the
Setup screen (p. 33).
¹ When in dual mode, the output video for program 1 (PGM 1)
fades in/out.
To fade the program 2 (PGM 2) output video in/out, touch
<FADE> on the multi-view PGM 2 screen.
Unlit
Normal output
Blinking Fading in/out
Lit
Fade-out completed
Video operations
19
Advertisement
Table of Contents
