Monitor] Button - Roland VR-6HD Startup Manual

12
[MENU] button
Switches the menu screen between visible and hidden.
13
[EXIT] button
Exits a menu level or cancels an operation.
14
[VALUE] knob
Selects the menu parameters, switches between
Turn parameters shown at the bottom of the display, and edits
their values.
Confirms the menu item you selected or the value that
Press
you edited.
15
PinP & KEY 1–2
This uses PinP and KEY 1–2 layers to composite video using PinP,
or picture-in-picture.
[PVW] buttons
Turns the inset screen preview output on/off.
[PGM] buttons
Turns PinP composition on/off.
[POSITION H] knob
Adjusts the horizontal position of the inset screen.
By turning the knob while pressing it, you can adjust the size of
the inset screen.
[POSITION V] knob
Adjusts the vertical position of the inset screen.
By turning the knob while pressing it, you can adjust the zoom of
the video shown in the inset screen.
16
[MONITOR]
button
Switches between video signals to monitor on the built-in display
(monitor).
Button Explanation
The final output video, preview output video and the
MULTI-VIEW videos allocated to the VIDEO SWITCHER [1]–[6] buttons
are shown in sections of the display.
PROGRAM Shows the final output video.
AUDIO LEVEL Shows the audio level screen in the display.
Shows the loaded still images in 16 separate sections on
STILL-VIEW
the display.
* The settings described above are the factory defaults. You can also
assign different functions to the button.
17
[OUTPUT FADE] button
The final output video and audio fade in/out.
Lit Fade-out completed
Blink
Fading-in/out
Unlit Normal output
* The settings described above are the factory defaults. You can assign
different functions to the [OUTPUT FADE] button.
18
DSK
This uses DSK layer to composite video using a downstream keyer.
[PVW] button
Turns the preview output of the DSK compositing result on/off.
[PGM] button
Turns DSK composition on/off.
19
PANEL
[SETUP] button
Shows the setup screen in the display.
20
MODE
The functions of the VIDEO SWITCHER [1]–[6] buttons change
according to the mode you select when pressing the buttons.
[INPUT SELECT] button
Use the VIDEO SWITCHER [1]–[6] buttons to select the video
source to send to the PGM bus or the PVW bus.
[AUX] button
Use the VIDEO SWITCHER [1]–[6] buttons to select the video signal
to send to the AUX bus.
[SCENE MEMORY] button
Use the VIDEO SWITCHER [1]–[6] buttons to recall the scene
memories (which contains the registered settings for video, audio
and so on). Long-press the VIDEO SWITCHER [1]–[6] buttons to
register the current settings in a scene memory.
[MACRO] button
This switches the function of the VIDEO SWITCHER [1]–[6] buttons
to execute macros (a series of recorded operations).
21
TRANSITION
Selects the video transition effects.
[MIX] button
The two videos are mixed as the transition occurs.
[WIPE] button
The next video moves across to replace the original video.
[SPLIT] button
Here's how to composite two videos in dividing the screen into
left/right or upper/lower.
Panel Descriptions
3