Chapter 3 Data Storage And Retrieval - Roland VM-C7100 Owner's Manual

Chapter 3 Data Storage and Retrieval

Data inside this system is controlled as shown in the figure below.
fig.03-01
Internal Memory of the VM-C7200/C7100
PROJECT
(Current Settings)
SYSTEM SETTING
MIXER SETTING
SCENE
AUTO-MIX DATA
Auto-mix data is erased
after the power is turned off.
Auto-mix data is not recorded in the
console but recorded directly into project
data stored on the memory card.
Memory Card (2–16 MB)
PROJECT
(Backup)
SYSTEM SETTING
MIXER SETTING
SCENE 00-99
AUTO-MIX DATA
Current project
SCENE 00-49 when two processors are in use.
The memory of the console is classified as follows:
• Library/EZ Routing template
A library contains the settings of each input channel, equalizer, delay or effect.
Every library is named and can be reused as desired.
• Project
Combines all settings of the VM system except the library. This also includes
auto-mixing data.
LIBRARY (USER)
(only USER)
SAVE
EQ
DELAY LIBRARY 00 - 99
CH
EFFECT LIBRARY 00 - 199
EZ Routing
COPY
TEMPLATE (USER)
LOAD
STORE
(Backup)
LIBRARY (USER)
EQ LIBRARY 00 - 99
DELAY LIBRARY 00 - 99
CH LIBRARY 00 - 99
EFFECT LIBRARY 00 - 199
EZ Routing
TEMPLATE (USER)
00 - 19
The number of storable projects differs depending on the capacity of the memory card
(each project consumes approximately 2MB).
LIBRARY (PRESET)
LIBRARY 00 - 99 EQ LIBRARY 00 - 49
DELAY LIBRARY 00 - 19
LIBRARY 00 - 99
EFFECT LIBRARY 00 - 199
EZ Routing
TEMPLATE
00 - 29
SELECT
(PRESET)
00 - 09
Even if you use an over 16
MB memory card, you
cannot save the data more
than 16 MB.
43