Setting Up The Automix Function (Set Up) - Roland VM-C7100 Owner's Manual

Chapter 11 Recording/Playing Back Fader or Knob Actions (Automix)

Setting up the automix function (SET UP)

This operation is required before using the Automix function.
fig.11-01
1
3
5
1
CURRENT PROJECT
Here, you can check the name of the project currently selected.
2
MEMORY REMAIN
Here, you can check the remaining memory space that can be used for recording
Automix.
3
INITIAL SCENE
Defines the status of the mixer upon starting recording/playback of Automix.
SCENE:
NO SCENE:
4
REMOVE FOLLOW DATA
Sometimes, Automix previously recorded may still remain in sections following the
position where recording of Automix has been completed. This parameter defines
how such recordings should be handled.
OFF:
TO NEXTLOC:
TO END DATA:
5 RECORDABLE PARAMETERS
Defines if data is to be recorded with the Automix function or not (ON/OFF) by data
type.
LEVEL (FADER):
MUTE:
PAN:
EQ:
SURROUND:
SCENE:
BUSSND SW:
BUSSND LEVEL:
BUSSND PAN:
CUESND LEVEL:
CUESND PAN:
OTHERS:
200
4
Scene already recorded
Current status
Keeps all in memory.
Deletes the data up to the first LOCATE point after the
position where the Automix function has completed its
operation.
Erase all to the end.
Volume of a channel
Muting of a channel
Sound localization on the channel
Channel EQ
Channel's sound field
Scene
Send signals to the bus
Volume level of the bus sound
Localization of the bus sound
Volume level of the cue sound
Localization of the cue sound
Other data types
2
For detailed descriptions of
the types of data that can
be recorded with the
Automix function, see p.
198.