Editing Effects; Determining The Algorithm - Roland VM-C7100 Owner's Manual

Editing Effects

Determining the Algorithm

The basic operation of each effect is based on the algorithm selected. When starting
to set effects from the beginning, first select an algorithm. You can do this by
choosing a prototype library having the same name as the algorithm from the
preset effect library.
• Effects 1 to 8... Effect libraries between P000 and P038
• Master effect... Effect libraries between P039 and P041
Editing effects
After selecting a library, edit the effect to suit your purpose.
Invoking the Edit screen
(Steps marked * are not required for the master effect.)
1. Invoke the Effect screen menu.
For effects 1 to 8, press [EFFECTS 1-8], or for the master effect, press [SP MODELING
(MASTER FX)].
fig.08-002
2. Select the effect column to use with CURSOR [UP] and [DOWN] (*).
The effects appear on the screen in the following order from top to bottom: 1 to 3, 4
to 6, and 7 to 8.
3. Invoke the Edit Effect screen.
Press EDIT for the desired effect. ([F2], [F4] or [F6]. [F2] for the master effect.)
Chapter 8 Using the Internal Effects
Algorithm (p. 232)
Selecting effect libraries
(p. 113)
115