Chapter 3 Data Storage and Retrieval
Creating a new project
1. Press [PROJECT].
After a menu appears, press
fig.03-10
2. Press [F2] (NEW).
fig.03-11
3. Press [F2] (CREATE) and then [F5] (OK).
After the creation process is completed, press [F6] (EXIT).
Storing a project
The current state of the console can be stored at any time by overwriting and
updating the new project already created on a card.
Updating (storing) a project
1. Press [PROJECT].
After a menu appears, press
fig.03-10
2. Press [F1] (STORE) and then [F2] (STORE).
3. Press [F5] (OK) and then [F6] (EXIT) after storing is completed.
52
CURSOR
[DOWN] to display the following screen.
CURSOR
[DOWN] to display the following screen.
Pressing [UNDO/REDO]
beneath the ten-key keypad
while holding down
[SHIFT] allows you to
proceed to Step 3 from any
screen.