Copying Libraries Containing Various Settings; Calling Up And Saving A Library Screen - Roland VM-C7100 Owner's Manual

Chapter 3 Data Storage and Retrieval

Copying Libraries Containing Various Settings

Four types of libraries are available as follows:
Channel library: Combines major parameter settings of one input channel (user
library only).
Channel delay library: Combines phase delay (p. 69) and feedback delay (p. 81) of
each input channel.
Channel equalizer library: Combines the settings of the parametric equalizer
provided for each input channel.
Effect library: Combines the settings of internal effects 1 to 8 and master effect (p.
113).

Calling up and saving a library screen

Typically, use [COPY/LIBRARY] beneath the ten-key keypad to select a library and
copy the current settings. Press [COPY/LIBRARY] when the channel edit screen of
each item is recalled to call up the copy/library screen.
Copying a library to each channel
In the following descriptions, the delay library is used as an example. (Since Step 2
differs for the equalizer or channel library, refer to the column on next page.)
1. Make sure that [INPUT] or [MULTI IN] is selected under SECTION.
2. Call up the delay channel edit screen.
While holding down [CH EDIT] of the channel whose library is to be copied or
saved, press the status button marked [PREAMP GAIN] or [DELAY].
3. Press [COPY/LIBRARY].
This opens the channel delay library screen.
fig.03-02
4. Select one of the libraries and check the effect.
First, turn the V1 knob (SELECT GROUP) to select U ("User") or P ("Preset"). Then
turn the V2 knob (SELECT NUMBER) to select the number corresponding to the
desired library name on the display.
The actual effect can be heard by pressing [F1] (PREVIEW) (highlighted in black). To
initialize the channel delay, turn the button off.
44
The following input-
channel information is not
included in a channel
library:
input source, channel link
parameters,
pan link parameters,
status of auto-mixing and
solo,
assignment of insert effect,
connection from input
channel to MULTI OUT,
preamplifier gain of input
channel and setting of
phantom power supply
When you copy the effect
library, use the effect
library screen (p. 113)
instead of [COPY/
LIBRARY].
In this example, the
quick channel edit function
(p. 63) calls up the screen.