Chapter 8 Using The Internal Effects; How The Internal Effects Are Organized; Using The Speaker Modeling Function - Roland VM-C7100 Owner's Manual

Chapter 8 Using the Internal Effects

How the Internal Effects Are Organized

The system allows you to use the internal effects simultaneously for up to nine stereo
channels per processor. Effects (FX) 3 to 8 require effects expansion boards (sold
separately).
Installation of effects
FX1 and FX2
FX3 and FX4
FX5 and FX6
FX7 and FX8
Master FX
Types of effects (algorithms)
Effects 1 to 8
Master effect

Using the Speaker Modeling function

Speaker Modeling is one of the effect algorithms that simulates sounds played back
with a variety of monitor speakers. It is, therefore, applied mainly to MONITOR
OUT using the master effect.
Normally, assign the master effect to MONITOR OUT and then copy the speaker
modeling library, following the procedure described on p. 111. Since the speaker
modeling algorithm can be used in effects 1 to 8, use these effects when you want to
assign them to other positions. Generally, Speaker Modeling is not used in the Send/
Return mode because it does not work properly if mixed with the dry sound.
Standard
Added by installing the VS8F-2 to EFFECT A in the processor.
Added by installing the VS8F-2 to EFFECT B in the processor.
Added by installing the VS8F-2 to EFFECT C in the processor.
Standard. For insertion to MAIN OUT and MONITOR.
39 algorithms
3 algorithms
Algorithms (p. 232)
For how to install the VS8F-
2, refer to "Installing
Optional Devices/
Installing Effects Processors
(VS8F-2)" in the VM-7200/
7100 processor owner's
manual.
109