Other Matters - Roland VM-C7100 Owner's Manual

Q. What about the sampling rate when the R-BUS is used for receiving
digital audio signals?
A.
This is locked to the sampling rate of the digital audio signals received through the R-
BUS.
Q. When the sampling rate of the digital audio signals received through
the R-BUS is locked, what would happen if I input signals with a
different sampling rate through DIGITAL IN A or B?
A.
There is no problem with this setup. Signals can received through the DIGITAL IN A
and B connectors without being locked, regardless of the sampling rate; the rate can
also be locked as needed.

Other matters

Q. What special features offered by this system are not available on
previous large digital mixers?
A.
This system is superior to previous digital mixers in the following:
• Separate components provide superior sound quality, portability, and ease of
operation.
• The lightweight and compact console is easier to set up at live events.
• The cost of cables is reduced.
• The system can be expanded as needed to satisfy different aims.
• All of the processor's analog inputs are mic level, and are supplied with
phantom power.
• All analog outputs feature 24-bit AD/DA conversion for high-quality sound.
• The system can store and recall the input gain and the On/Off setting of the
phantom power.
• In addition to a four-band equalizer, the system is also equipped with a high-
pass filter.
• The channel equalizer features switchable filters on the LO-MID band.
• Up to 300-msec channel delay; this can also be used as a comb filter.
• The console buttons can be used for remote control of multi-track recorders and
other devices.
• Input jack-input channel configurations are freely adaptable.
• Input channels can be output directly to the recorder, making simultaneous SR
and live recording possible.
• The system (using one processor) can be expanded to include up to eight effects.
• Algorithms for numerous effects—not just spatial effects—are included.
• The motorized faders are extremely quiet.
• Memory cards can be used, making easy it to transfer and copy settings.
• The system features a built-in spectrum analyzer for easy room equalization.
This can also be used in creating sounds.
• Equipped with multi-purpose Flex buses.
• Adding Roland's optional DS-90 bi-amped monitors allows you to use the
Speaker Modeling function.
• With the EZ Routing function, making the settings you need is a breeze.
• Each channel is named, making it easy to distinguish the different channels on
the screen.
Q & A
269