Sends On Fader Section; Solo Clear Button; Talkback On Button; User Button Section - Roland M-200i V-mixer Owner's Manual

SENDS ON FADER section

8
fig.MeterBtn.eps
Pressing one of the [AUX1] through [AUX8] buttons turns on
SENDS ON FADER mode for the corresponding bus. The button
flashes while in SENDS ON FADER mode.
To select MTX as the destination, simultaneously press the pair
[AUX1]/[AUX2], [AUX3]/[AUX4], [AUX5]/[AUX6], or [AUX7]/
[AUX8].

SOLO CLEAR button

9
This Button cancels (turns off) solo for all channels and buses.

TALKBACK ON button

10
This button turns talkback on or off. It lights up when talkback is
on.
"Talkback" (p. 89)

USER button section

11
fig.SetupSectGuide.eps
These buttons access the functions assigned to USER [1] through
[8]. The functions of these buttons are user-configurable.
"User Preference settings" (p. 94)
Explanation of the panels
PHONES jacks
12
You can connect a set of headphones to these jacks, and use
them to monitor the MONITOR L/R audio signal.
• Miniature stereo phone type
• Stereo 1/4-inch phone type
The minimum impedance of headphones that you can
connect is 16Ω
* When connecting sets of headphones to both the miniature stereo
phone and the stereo 1/4-inch phone type jacks, ensure that the
combined impedance of the two sets of headphones is not less than
Ω
16

PHONES LEVEL knob

13
This adjusts the output level of headphones connected to the
PHONES jacks.

iPad connection area

14
Here you can place an iPad for controlling the unit remotely.
"How to Use TABLET STAND" (p. 13)
21