Muting Several Channels (Mute Group) - Roland VM-C7100 Owner's Manual

Chapter 7 Mixing Procedure 3 (Settings Common to Input and Output)

Muting several channels (mute group)

Each channel can be muted using [STATUS]. To mute several channels at the same
time, use the mute-group function.
This system provides nine mute groups. When a mute group is turned on or off, all
channels registered in the group are muted or un-muted, respectively.
Turning Mute Group 1 to 9 on/off
Press [MUTE GROUP] under MEMORY/RECALL and [1] to [9] to turn each group
on and off.
fig.07-02
Registering and deleting a channel in or from a mute group
Each channel can be registered in a mute group using the procedure below:
• Input Channels 1 to 24
• Multi-In Channels 1 to 24
• Flex Bus 1 to 12
• Fader Group 1 to 24
1. Press [MUTE GROUP] under MEMORY/RECALL while holding down
[SHIFT].
This calls up the mute group setting screen.
2. Use [PAGE UP] or [PAGE DOWN] to select the mute group you want to
work with.
To select Mute Group 2, for example, choose GRP 2.
fig.07-03
To mute each channel
separately, press [MUTE]
under CH STATUS MODE
and press the desired
channel's STATUS button
(p. 77).
Muting a fader group
channel silences the group
the same way that lowering
its fader completely does.
Select the VIEW page in
Step 2 to see which
channels, if any, are
currently muted. The mute
setting can also be changed
directly using the cursor
and [F1] to [F6].
103