Bndisolater (3-Band Isolator) - Roland VM-C7100 Owner's Manual

Chapter 8 Using the Internal Effects

3BndIsolater (3-Band Isolator)

Sharply cuts off components by frequency band to eliminate undesired sounds. Useful to eliminate undesired
sounds and take out only specific sounds from a CD. Isolator can make sounds completely perish, unlike ordinary
equalizers that leave some sounds even with the gains of the respective frequency bands set to the minimum.
fig.08-69
Input L
Input R
Muting the bass
Set up as follows to eliminate low frequency band sounds such as bass sounds.
Anti-phase Low Mix Switch (Lo-Mix Sw):
Anti-phase Low Level (AntiPhase Lo Level):
Muting vocals
Set up as follows to eliminate middle frequency band sounds such as vocal sounds.
Anti-phase Middle Mix Switch (Mid-Mix Sw):
Anti-phase Middle Level (AntiPhase Mid Level): Relatively high
Muting noise
Identify the frequency band of the noise and set the relevant Level (Lo Level, Mid Level or Hi Level) to -60 dB.
Parameter (full name)
Isolator (3-band Isolator): Divides the input sound into three frequency bands to abstract or eliminate the
Sw (Switch)
Lo-Mix Sw (Anti-phase Low Mix Switch)
Mid-Mix Sw (Anti-phase Middle Mix Switch) On, Off
Lo Level (Low Level)
Mid Level (Middle Level)
Hi Level (High Level)
AntiPhase Lo Level (Anti-phase Low Level)
AntiPhase Mid Level (Anti-phase Middle Level) 0–100
Isolator (p. 238)
166
Output L
3 Band
Isolater L
3 Band
Isolater R
Output R
Setting
sound.
On, Off
On, Off
-60– +4 dB
-60– +4 dB
-60– +4 dB
0–100
On
Relatively high
On
Function
Turns the 3-band isolator on or off.
Mutes or leaves the low frequency band sound.
Mutes or leaves the middle frequency band sound.
Increases or decreases frequency bands in the low
frequency band.
Increases or decreases frequency bands in the middle
frequency band.
Increases or decreases frequency bands in the high
frequency band.
Sets the amount of the low frequency band sound should
be muted.
Sets how much of the middle frequency band sound should
be muted.