Measuring Outputs Using The Talkback Microphone - Roland VM-C7100 Owner's Manual

• Equalizer band select
using [F3] (BAND-) and [F4] (BAND+). The black triangle shows the currently
selected frequency.
• Equalizer gain
• Gain reset Press [F5] (RESET) to reset the boost or cut for the selected band to
±0 dB, or [F6] (ALL RST) to reset the boost or cut for all bands.
• Equalizer I/O level
equalizer, and [V6] (RETURN) to set the equalizer's output level. These
parameters can be set from 0 to 127—a setting of 100 (0 dB) means that the signal
is not being cut or boosted.

Measuring outputs using the talkback microphone

Signal from the talkback microphone connected to the MIC 2 connector on the
console can also be sent to the analyzer. Use [Send to ANALYZER], located next to
the MIC 2 connector for this purpose. As with normal talkback, this will use the
CONSOLE IN R signal channel (CH 24).
fig.09-08
What happens after [Send to ANALYZER] is pressed:
• [Send to ANALYZER] lights.
• [ANALYZER/OSC/GEN] also lights and the display presents the ANALYZER
screen, just as if you had pressed [ANALYZER/OSC/GEN].
• The source setting temporarily changes to INP 24 on the screen, since the
talkback microphone is assigned to Input Channel 24.
Pressing [Send to ANALYZER] again reverts the functions to the state of right after
pressing [ANALYZER/OSC/GEN]. You can change the input source while [Send to
ANALYZER] is lit.
(The channels selected after changing the input source are not muted automatically.
Change the analyzer source to CH 24 again returns to the initial state.)
Select a frequency band by turning [V3] (BAND) or
Turn [V4] (GAIN) to boost or cut the level of the selected band.
Use [V5] (SEND) to set the level of signal sent into the
Chapter 9 Using the Spectrum Analyzer
Press [Send to
ANALYZER] to use the
talkback microphone and
the analyzer.
Since Input Channel 24's
sends to the main mix, cue
bus or Flex Buses are
disabled when talkback is
active, the talkback
microphone's signal is
displayed by the analyzer
but not sent to any system
outputs.
189