Calling Up Stored Connections (Ez Routing); Routing Template - Roland VM-C7100 Owner's Manual

Calling Up Stored Connections (EZ Routing)

The EZ Routing function allows you to quickly establish a set of saved connections.
EZ Routing can be a connection template or a virtual patchbay setup.

Routing template

This type of EZ Routing instantaneously calls up one of the pre-defined internal
connection templates, each of which is designed to serve a particular purpose. When
shipped, 9 EZ Routing template presets are stored in the console. The console can
also store up to 30 user-defined EZ Routing templates. The data saved in a template
is the same as that saved in a Scene on a memory card.
Selecting a template
1. Press [EZ ROUTING] and [F1] (TEMPLATE), in that order.
This calls up the template select/save screen.
2. Select the desired template.
Turn the V1 knob (SELECT GROUP) to select P ("Preset") or U ("User"). Then turn
the V2 knob (SELECT NUMBER) to select a number – P000 to P009 or U000 to U029
– corresponding to the desired template's name.
3. Press [F2] (COPY).
This activates the template's settings, changing the current settings.
Chapter 4 Useful Functions
Press [F1] (PREVIEW) so
that it's highlighted in
black to temporarily
change the internal
connections to those in the
selected template; this
allows you to preview the
new connections. Turn [F1]
off to restore the current
settings.
The original connections
cannot be restored after this
step, unless they are saved
as a template or Scene.
59