Removing/Replacing A Tape Or Dvd-Rom Drive; Figure 8-2 Front Bezel - Sun Microsystems Enterprise 3500 System Reference Manual

8.1.2

Removing/Replacing a Tape or DVD-ROM Drive

1. Remove the front bezel.
a. Grasp the front bezel on both sides near the center.
Place your thumbs on top of the front bezel and place your other fingers at the
slight indentations under the front bezel for leverage.
b. Pull the front bezel straight out toward you and set it aside (
FIGURE 8-2
2. Loosen the bottom two captive screws that secure the media tray to the chassis
tray (
3. Use a screwdriver in the notch at the bottom center of the tray to assist in
separating the media tray from the rear slip connectors, and pull out the tray
containing the devices (
Front Bezel
).
FIGURE 8-3
FIGURE 8-3
).
Chapter 8 Internal SCSI and FC-AL Devices
).
FIGURE 8-2
8-3