Replacement Procedures - Dräger Medical Fabius Tiro Technical & Service Manual

Replacement Procedure

Replacement Procedures

Dräger Medical AG & Co. KGaA
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
RETURN TO CD-ROM TABLE OF CONTENTS
This section outlines removal and replacement procedures for the field-
replaceable assemblies of the Fabius Tiro Anesthesia System.
These procedures are to be performed only by a qualified Technical Service
Representative (TSR).
The following are the only procedures authorized by DrägerService to be per-
formed in the field. All other service procedures shall be referred to Draeger
Medical, Inc., DrägerService.
NOTE
The PMS PROCEDURE must be performed after any replacement,
removal, calibration or adjustment procedure.
6020.002
Fabius Tiro
Revision A Released
137