Guidance And Manufacturer's Declaration-Electromagnetic Immunity - Dräger Medical Fabius Tiro Technical & Service Manual

Electromagnetic Testing and Compliance
3 Guidance and manu-
facturer's declara-
tion-electromagnetic
immunity
54
Dräger Medical Systems, Inc.
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
Table 1 Electromagnetic Emissions
Emissions test Compliance level
RF emissions Group 1
CISPR 11
RF emissions Class B
CISPR 11
Harmonic emis- Complies
sions
IEC 61000-3-2
Class A
Voltage fluctua- Complies
tions/flicker emis-
sions
IEC 61000-3-3
The Fabius Tiro is intended for use in the electromagnetic environment spec-
ified below. The customer or the user of the Fabius Tiro should assure that it
is used in such an environment.
Table 2 Electromagnetic Immunity
Immunity test IEC 60601 test
Electrostatic dis- +/-6 kV contact
charge (ESD) +/-8 kV air
IEC61000-4-2
Electrical fast +/-2 kV for power
Transient/burst supply lines
IEC61000-4-4 +/-1 kV for
input/output lines
Surge +/-1 kV differen-
IEC61000-4-5 tial mode
+/-2 kV common
mode
6020.002
RETURN TO CD-ROM TABLE OF CONTENTS
Recommendations
The Fabius Tiro uses RF energy
only for its internal function.
Therefore, its RF emissions are
very low and are not likely to
cause any interference in nearby
electronic equipment.
The Fabius Tiro is suitable for
use in all establishments, except
NMR environments, including
domestic establishments and
those directly connected to the
public low-voltage power supply
network that supplies buildings
used for domestic purposes.
Compliance
level level
Complies
Complies
Complies
Revision B Released
Fabius Tiro
Recommendations
Floors should be
wood, concrete, or
ceramic tile. If floors
are covered with
synthetic material,
the relative humidity
should be at least
30%.
Mains power quality
should be that of a
typical commercial or
hospital environ-
ment.
Mains power quality
should be that of a
typical commercial or
hospital environ-
ment.