No Fresh Gas - Dräger Medical Fabius Tiro Technical & Service Manual

Fabius Tiro

7.2.3.1 No Fresh Gas

124
Dräger Medical AG & Co. KGaA
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
Figure 31 Alarms Selection Screen
To return to the Configure category screen, scroll to the return arrow and
press the knob.
When No Fresh Gas is chosen, the screen will appear as shown in
Turn the rotary knob to select Change State, and press the knob to highlight
the choices. Then turn the rotary knob to select either ENABLE or DISABLE,
and press the knob to enter that selection.
Enabling No Fresh Gas provides a message to the operator when the fresh
gas sensor detects no flow while in an active ventilator mode.
6020.002
RETURN TO CD-ROM TABLE OF CONTENTS
Revision B Released
Diagnostics
Figure 32.