Dräger Medical Fabius Tiro Technical & Service Manual page 236

Fabius Tiro
230
Dräger Medical AG & Co. KGaA
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
Figure 1 Boot Flash Position
Figure 2 Boot Strap Position
4. Connect the 3-pin plug end of the boot strap download cable (P/N
4117459) to J13 on the control PCB. See
5. Connect the DB9 end of the cable to the Com1 port on the PC.
6. Power up the PC and double-click the "send_img" icon on desk top. The
following screen will appear:
Figure 3 Communications Settings Screen
7. Choose "Boot Strap and Image transfer", then click OK or press Enter.
6020.002
RETURN TO CD-ROM TABLE OF CONTENTS
Software Update Procedure
Figure 6.
Revision B Released