Dräger Medical Fabius Tiro Technical & Service Manual page 269

FABIUS TIRO
8.9.1.16 Examine all pneumatic hoses connecting from the interface panel to
8.9.1.17 Inspect the breathing circuit and manual breathing bag. Is the
8.9.1.18 Inspect the ventilator hose and associated O-rings connected
8.9.1.19 Inspect the fresh gas hose connected to the breathing system. Is
8.9.1.20 Inspect APL valve labeling for legibility. Are all markings on APL
8.9.1.21 Inspect the scavenger gas connection on the breathing system. Is
8.9.2 Fresh Gas Leak
8.9.2.1
8.9.2.2
8.9.2.3
8.9.2.4
8.9.2.5
( ) 8.9.2.6
8.9.2.7
8.9.2.8
( ) 8.9.2.9
8.9.2.10 Turn off the vaporizer.
8.9.2.11 Remove the test equipment from the fresh gas hose.
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
APPENDIX A
the breathing system. Are the hoses kink free and in good
condition? ___(Y)
breathing circuit and manual breathing bag in good condition?
___(Y)
between breathing system and machine. Are the hose and O-rings
in good condition? ___(Y)
the fresh gas connector and washer in good condition? ___(Y)
valve easy to see and legible? ___(Y)
the scavenger connector in good condition? ___(Y)
Push the System Power switch OFF (
Remove the fresh gas connector from the breathing system.
Connect the fresh gas hose from the breathing system to the fresh
gas leak test fixture (4113119 modified) or equivalent, via the fresh
gas test connector 4117361.
Connect a digital pressure manometer to the fresh gas leak test
device.
Apply 50 cm H O of pressure to the system.
2
After thirty (30) seconds, what is the pressure on the manometer?
___ (>40 cm H O)
2
Turn on the vaporizer to the first graduated marking.
Apply 50 cm H O of pressure to the system.
2
After thirty (30) seconds, what is the pressure on the manometer?
___ (>40 cm H O)
2
27
RETURN TO CD-ROM TABLE OF CONTENTS
PMS PROCEDURE (continued)
).