Dräger Medical Fabius Tiro Technical & Service Manual page 101

Diagnostics
Dräger Medical AG & Co. KGaA
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
RETURN TO CD-ROM TABLE OF CONTENTS
Table 5 Service Log Events
Code Description
S006 Service Log Clear
SS90 test message
I001 CPU Diag Recovery
Table 6 User Interface Events
Code Description
U001 New Device ID Created
U002 Option Enabled
U003 Option Disabled
U007 Model Changed to FGS
U008 Model Changed to Tiro
U009 Monitoring Disabled
U010 Monitoring Enabled
U012 SOS Recovered
U013 FGS SOS Invalid
U014 Tiro SOS Invalid
Table 7 Ventilator Errors
Code Description
V001 VENT PEEP NOT CAL
V002 ZERO POS INVALID
V037 EX VALVE LEAK
6020.002
Fabius Tiro
Possible Cause
Log cleared by service tech, SW
upgrade
Factory test - no failure
CPU recovered from bad initial-
ization
Possible Cause
Machine detected a new device
ID was needed because of
NVRAM corruption or previously
did not exist
A secure option was enabled
A secure option was disabled
Model-type change
Model-type change
Monitoring-mode change
Monitoring-mode change
A Secure Option Setting was
recovered after a partial NVRAM
corruption
The FGS Secure Options Setting
NVRAM file was found corrupt
and no Options were recovered
The Tiro Secure Options Setting
NVRAM file was found corrupt
and no Options were recovered
Possible Cause
Auto ventilation was attempted
without valid PEEP calibration
Crossing of light barrier at bottom
vent not detected
Greater than 15 mL of Tidal Vol-
ume during inspiration, and this
Vt is greater than 10% of Vt flow
during expiration
Revision B Released
95