Function Description; Networking Several Winsta ® Sunblind Boxes; Bus Operation; Central Operation - WAGO WINSTA 770 Manual

26

Function Description

Pos : 45 /All e Seri en (Allgemei ne Dokumente) (Allgemei ne Module)/Ü berschriften für alle Serien/F unktions bes chr eibung - Ü bersc hrift 1 @ 4\mod_1239025975389_21.doc x @ 30003 @ 1 @ 1
4 Function Description
Pos : 46 /Serie 770 ( WINSTA-Boxen) /Funkti onsbesc hrei bung/F unktions beschr eibung 0770-0629/0130- 0000 @ 6\mod_1256822053080_21.doc x @ 43967 @ 2332333 @ 1
4.1 Networking Several WINSTA
In addition to independent use, several WINSTA
networked in order to be able to trigger operating functions from a central
location.
4.1.1

Bus Operation

The WINSTA
485, 750-653/003-000) via which the WAGO-I/O-SYSTEM as the superior
controller can access up to 16 boxes per bus segment. This operating mode
addresses both individual channels and groups of boxes.
Additional information about programming
For additional information about programming and the possible functions, see
www.wago.com
When bus failure monitoring is activated, the drives linked to the system will
move to their top, final position on a continuous bus failure lasting longer than 3
minutes.
4.1.2

Central Operation

The WINSTA
sunblinds for all connected boxes are moved into the upper or lower end position
via this control line. Either a weather station, a timer or a central switch enables
this functionality.
When line break monitoring is activated, the drives linked to the system will move
to their top, final position on a simultaneous error with both control signals.
770-629/130-000 WINSTA® Sunblind Box 4 Channel
®
sunblind boxes are connected to a serial bus (serial interface RS-
> Downloads > Building automation.
®
sunblind boxes are connected via a 24VDC power line. The
Version 1.2.0, valid from HW/FW version XXXX0201XX
WAGO WINSTA® 770
®
Sunblind Boxes
®
sunblind boxes can also be
Manual