Lcd Panel Menus; Component Descriptions; Table 6: Lcd Panel Menu Options - Juniper EX3300 Complete Hardware Manual

LCD Panel Menus

Table 6: LCD Panel Menu Options

Menu Description
IDLE In the Idle menu:
Press Enter
SPD (speed)
ADM (administrative status)
DPX (duplex)
POE (Power over Ethernet)
See "Network Port and Uplink Port LEDs in EX3300 Switches" on page 17
LED modes.
Press
Menu
Copyright © 2015, Juniper Networks, Inc.
Request VC port (for an EX3300 switch that is a member of a Virtual Chassis)
Factory default
System EZSetup
The LCD panel has three menus: Idle, Status, and Maintenance. Toggle between the LCD
panel menus by pressing the
the Enter button.
Table 6 on page 13 describes the LCD panel menu options.
to cycle through the Status LED modes:
to exit the Idle menu and go to the Status menu.
button. Navigate through the menu options by pressing
Menu
Chapter 2: Component Descriptions
for information on the Status
13