Lcd Panel Menus; Component Descriptions; Table 4: Lcd Panel Menu Options In Ex3200 And Ex4200 Switches - Juniper EX3200 Series Complete Hardware Manual

LCD Panel Menus

Table 4: LCD Panel Menu Options in EX3200 and EX4200 Switches

Menu Description
IDLE In the Idle menu:
Press
Enter
ADM (administrative status)
DPX (duplex)
Power over Ethernet (PoE)
SPD (speed)
See "Network Port LEDs in EX3200 and EX4200 Switches" on page 21 for information on the Status LED
modes.
Press
Menu
Copyright © 2010, Juniper Networks, Inc.
In the maintenance mode, the second line displays one of the following options that you
can use to configure and troubleshoot the switch:
System halt
System reboot
Load rescue
Request VC port (for an EX4200 switch that is a member of a Virtual Chassis)
Factory default
System EZSetup
The LCD panel has three menus: Idle, Status, and Maintenance. Toggle between the LCD
panel menus by pressing the
the button.
Enter
Table 4 on page 15 describes the LCD panel menu options.
to cycle through the Status LED modes:
to exit the Idle menu and go to the Status menu.
button. Navigate through the menu options by pressing
Menu
Chapter 2: Component Descriptions
15