Check Active Alarms With The J-Web Interface - Juniper EX4200 Hardware Manual

Table 60: Chassis Component Alarm Conditions on EX4200 Switches (continued)
Chassis
Component Alarm Condition
Routing /var partition usage is
high.
Engine
/var partition is full.
Rescue configuration is
not set.
Feature usage requires a
license or the license for
the feature usage has
expired.

Check Active Alarms with the J-Web Interface

Purpose
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to view alarm information for the EX Series switches including alarm type,
alarm severity, and a brief description for each active alarm on the switching platform.
Action
To view the active alarms:
1. Select Monitor > Events and Alarms > View Alarms in the J-Web interface.
2. Select an alarm filter based on alarm type, severity, description, and date range.
3. Click Go.
All the alarms matching the filter are displayed.
Alarm
Severity Remedy
Minor Clean up the system file storage space on the switch.
(yellow) For more information, see Freeing Up System Storage
Space.
Major (red) Clean up the system file storage space on the switch.
For more information, see Freeing Up System Storage
Space.
Minor Use the request system configuration rescue save
(yellow) command to set the rescue configuration.
Minor Install the required license for the feature specified in
(yellow) the alarm. For more information, see Understanding
Software Licenses for EX Series Switches.
240