Checking Active Alarms With The J-Web Interface - Juniper EX3200 Hardware Manual

Related
Documentation

Checking Active Alarms with the J-Web Interface

Purpose
Action
Copyright © 2016, Juniper Networks, Inc.
Table 59: Chassis Component Alarm Conditions on EX3200
Switches (continued)
Chassis
Component Alarm Condition
Routing /var
partition usage
Engine is high.
/var partition is full.
Rescue
configuration is not
set.
Feature usage
requires a license or
the license for the
feature usage has
expired.
Field-Replaceable Units in EX3200 Switches on page 8
Chassis Status LEDs in EX3200 Switches on page 18
Understanding Alarm Types and Severity Levels on EX Series Switches on page 219
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to view alarm information for the EX Series switches
including alarm type, alarm severity, and a brief description for each active alarm on the
switching platform.
To view the active alarms:
Select >
1. Monitor Events and Alarms
Select an alarm filter based on alarm type, severity, description, and date range.
2.
Click Go .
3.
All the alarms matching the filter are displayed.
Chapter 21: Alarms and Syslog Messages
Alarm
Severity Remedy
Minor Clean up the system file storage space on
(yellow) the switch. For more information, see
Cleaning Up the System File Storage Space.
Major Clean up the system file storage space on
(red) the switch. For more information, see
Cleaning Up the System File Storage Space.
Minor Use the
request system configuration rescue
(yellow) command to set the rescue
save
configuration. For more information, see
Setting or Deleting the Rescue Configuration
(CLI Procedure).
Minor Install the required license for the feature
(yellow) specified in the alarm. For more information,
see Understanding Software Licenses for EX
Series Switches.
> in the J-Web interface.
View Alarms
225