Installing The Switch; Installing And Connecting An Ex3300 Switch - Juniper EX3300 Complete Hardware Manual

CHAPTER 9

Installing the Switch

Installing and Connecting an EX3300 Switch

Copyright © 2015, Juniper Networks, Inc.
Installing and Connecting an EX3300 Switch on page 81
Unpacking an EX3300 Switch on page 82
Parts Inventory (Packing List) for an EX3300 Switch on page 83
Mounting an EX3300 Switch on page 84
Mounting an EX3300 Switch on Two Posts in a Rack or Cabinet on page 84
Mounting an EX3300 Switch on Four Posts in a Rack or Cabinet on page 87
Mounting an EX3300 Switch in a Recessed Position in a Rack or Cabinet on page 90
Mounting an EX3300 Switch on a Desk or Other Level Surface on page 91
Mounting an EX3300 Switch on a Wall on page 92
To install and connect an EX3300 switch:
Follow instructions in "Unpacking an EX3300 Switch" on page
1.
Mount the switch by following instructions appropriate for your site:
2.
"Mounting an EX3300 Switch on Two Posts in a Rack or Cabinet" on page 84
the mounting brackets provided)
"Mounting an EX3300 Switch on Four Posts in a Rack or Cabinet" on page 87
the separately orderable four-post rack-mount kit)
"Mounting an EX3300 Switch in a Recessed Position in a Rack or Cabinet" on page 90
(using the 2-in.-recess front brackets from the separately orderable four-post
rack-mount kit)
"Mounting an EX3300 Switch on a Desk or Other Level Surface" on page 91
the rubber feet provided)
"Mounting an EX3300 Switch on a Wall" on page 92
wall-mount kit)
Follow instructions in "Connecting Earth Ground to an EX Series Switch" on page
3.
Follow instructions in "Connecting AC Power to an EX3300 Switch" on page 105
4.
"Connecting DC Power to an EX3300 Switch" on page
82.
(using
(using
(using
(using the separately orderable
107.
99.
or
81