Initial Installation And Configuration; Unpacking And Mounting An Ex4600 Switch; Installing And Connecting An Ex4600 Switch - Juniper EX4600 Hardware Manual

CHAPTER 3

Initial Installation and Configuration

Unpacking and Mounting an EX4600 Switch

Installing and Connecting an EX4600 Switch

Copyright © 2019, Juniper Networks, Inc.
Unpacking and Mounting an EX4600 Switch on page 67
Connecting the EX4600 to Power on page 72
Connecting the EX4600 to Management Devices on page 80
Configuring Junos OS on the EX4600 on page 83
Installing and Connecting an EX4600 Switch on page 67
Unpacking an EX4600 Switch on page 68
Mounting an EX4600 Switch in a Rack or Cabinet on page 69
You can mount an EX4600 switch:
Flush with the front of a 19-in. four-post rack. Use the standard mounting brackets
provided with the switch for this configuration.
Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Use the extension bracket
provided in the standard mounting kit for this configuration. Recessed mounting is
primarily used in enclosed cabinets.
To install and connect an EX4600 switch:
Follow the instructions in
1.
Determine how the switch is to be mounted.
2.
Flush or recessed mounted in a rack or cabinet, see
a Rack or Cabinet" on page
"Unpacking an EX4600 Switch" on page
"Mounting an EX4600 Switch in
69.
68.
67