Qfx10002 Management Cable Specifications And Pinouts; Cable Specifications For Console And Management Connections For The Qfx Series - Juniper QFX10002 Hardware Manual

QFX10002 Management Cable Specifications and
Pinouts
IN THIS SECTION
Cable Specifications for Console and Management Connections for the QFX Series | 84
RJ-45 Management Port Connector Pinout Information | 85
Console Port Connector Pinout Information | 86
RJ-45 to DB-9 Serial Port Adapter Pinout Information | 87
RJ-45 Port, SFP Port, SFP+ Port, QSFP+ Port, and QSFP28 Port Connector Pinout Information | 87
USB Port Specifications for the QFX Series | 94
Cable Specifications for Console and Management Connections for the
QFX Series
Table 37 on page 84 lists the specifications for the cables that connect the QFX Series switch to a
management device.
NOTE: The QFX Series can be configured with SFP management ports that support 1000BASE-
SX transceivers. See the
for use with these transceivers.
Table 37: Cable Specifications for Console and Management Connections for the QFX Series
Port on QFX Series Cable Specification
Device
Console port RS-232 (EIA-232) serial
cable
Hardware Compatibility Tool
Cable Supplied
One 7-foot (2.13-meter)
long RJ-45 patch cable
and RJ-45 to DB-9
adapter
for more on the fiber-optic cables required
Maximum Length
7 feet
(2.13 meters)
84
Device
Receptacle
RJ-45