The calculated power margin is greater than zero, indicating that the link has sufficient power for
transmission. Also, the power margin value does not exceed the maximum receiver input power.
Refer to the specification for your receiver to find the maximum receiver input power.
EX4100 and EX4100-F Management Cable
Specifications and Pinouts
IN THIS SECTION
Management Cable Specifications
Table 32 on page 109
lists the specifications for the cables that connect the console and management
ports to management devices.
Table 32: Specifications of Cables to Connect to Management Devices
Ports
RJ-45 Console port
Cable Specifications
Receptacle
CAT5e UTP (unshielded
RJ-45
twisted pair) cable
Additional Information
Connect a Device to a
Management Console
Using an RJ-45 Connector
109