Qfx5130-32Cd Management Cable Specifications And Pinouts - Juniper QFX5130-32CD Hardware Manual

P = 13 dB – 2 km (1 dB/km) – 5 (0.5 dB) – 2 (0.5 dB) – 0.5 dB
M
P = 13 dB – 2 dB – 2.5 dB – 1 dB – 0.5 dB
M
P = 7 dB
M
The following sample calculation for an 8-km-long single-mode link with a power budget (P
uses the estimated values from
fiber attenuation (8 km @ 0.5 dB/km, or 4 dB) and loss for seven connectors (0.5 dB per connector, or
3.5 dB). The power margin (P
P = P – LL
M B
P = 13 dB – 8 km (0.5 dB/km) – 7(0.5 dB)
M
P = 13 dB – 4 dB – 3.5 dB
M
P = 5.5 dB
M
In both examples, the calculated power margin is greater than zero, indicating that the link has sufficient
power for transmission and does not exceed the maximum receiver input power.
RELATED DOCUMENTATION
Maintaining Transceivers and Fiber Optic Cables on a QFX5130-32CD | 105
QFX5130-32CD Management Cable Specifications
and Pinouts
IN THIS SECTION
Cable Specifications for Console and Management Connections for the QFX Series | 55
RJ-45 Management Port Connector Pinout Information | 55
Console Port Connector Pinouts for the QFX Series | 56
QSFP-DD Port Connector Pinout Information | 57
QSFP+, QSFP28, and QSFP56 Port Connector Pinout Information | 62
Table 25 on page 53. This example calculates link loss (LL) as the sum of
) is calculated as follows:
M
54
) of 13 dB
B