Upc/Ean - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

UPC/EAN

Purpose: Enables/disables the decoding of Universal Product Code (UPC)/European
Article Numbering (EAN) symbology. UPC/EAN are fixed length, numeric,
continuous symbologies that use four element widths. An EAN-configured
JANUS 2050 can decode UPC, but the reverse is not true. UPC code is a subset
of EAN code.
The fifth, sixth, and seventh digits are optional. Setting the sixth digit to 0
strips one leading digit from UPC-A, UPC-E, and EAN-8 and two leading
digits from EAN-13. If you want to set the sixth digit, you must also set the
fifth digit.
Default: UPC-A/EAN-13, UPC-E, and EAN-8 enabled, supplementals allowed, transmit
check digit, transmit number system digit, and retain UPC-A leading zero
Syntax: CEdata
data must be 4 to 7 digits selected from the following list:
First digit:
Second digit:
Third digit:
Fourth digit
Fifth digit:
Sixth digit:
Seventh digit:
Scan: To disable UPC/EAN, scan the following bar code:
Disable UPC/EAN
*$+CE000000*
*$+CE000000*
10-94
39 nugget
0 UPC-A/EAN-13 disabled
1 UPC-A/EAN-13 enabled
2 UPC-A only
0 UPC-E disabled
1 UPC-E enabled
0 EAN-8 disabled
1 EAN-8 enabled
0 Supplementals not allowed
1 Supplementals allowed
0 Discard check digit
1 Transmit check digit
0 Discard number system digit
1 Transmit number system digit
0 Discard UPC-A leading zero
1 Retain UPC-A leading zero
A