Starting The Janus 2050 For The First Time; Unpacking The Janus 2050; Mounting The Janus 2050 On A Vehicle - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

Starting the JANUS 2050 for the First Time

To prepare and start the JANUS 2050 for the first time, you will need to:
These steps are described in detail in the following pages.

Unpacking the JANUS 2050

When you remove the JANUS 2050 from its box, save the box and shipping
material in case you need to ship or store the JANUS 2050. A set of disks is
included in the box with the JANUS 2050. Check the contents against the
invoice for completeness and contact your Intermec representative if there is a
problem.
Note: A README file is included on companion disk 1 that is shipped with the
JANUS 2050. README.DOC contains additional information about the JANUS
2050 and its operation. You can view or print this file using any text editor.

Mounting the JANUS 2050 on a Vehicle

The JANUS 2050 is designed to be mounted on a vertical or horizontal surface.
Use the following instructions as guidelines for installation.
1-6
Unpack the JANUS 2050 and check the contents against the order invoice.
Mount the JANUS 2050 on a vehicle using the mounting bracket.
Connect the JANUS 2050 to the vehicle's power supply.
Install the radio antenna.
Connect a scanning device to the JANUS 2050.
Turn on the JANUS 2050 for the first time.
Set the date and time.
At the DOS prompt, enter data from the keypad or by using a scanning
device.
In most cases, you will need to weld or bolt a flat mounting plate to the
vehicle to secure the JANUS 2050 mounting bracket.
Mount the JANUS 2050 where the operator can easily see the display and
use the keyboard. If possible, you should mount the unit in a location that
avoids glare from overhead lighting and sunlight.
The mounting position should provide adequate access to the front panel
so that the operator can easily see and use the JANUS 2050.
39 nugget A