Intermec Janus 2050 User Manual page 82

nugg nuggJVMU
All of the MAKE and LOAD batch files save the image file to the file
NEWDRV_C\IMAGE\DRIVEC.IMG. This file allows you to create multiple
drive C image files for two or more JANUS 2050s. If you are going to create
more than one image file, you need to rename each image file after you create
it. Otherwise, it is overwritten the next time you create a LOAD or MAKE
batch file.
Note: The Auto-Loader batch files must be installed on your host computer before you
create an image file. For instructions and more information, see "Installing Auto-
Loader" earlier in this chapter.
To create an image file
1. The default startup files are installed on your host computer in the
subdirectory C_FILES\COMMON. You can create an image file that
contains only the startup files, or an image file that contains other files in
addition to the startup files. Use one of the following commands on the
host computer to create the image file:
• To create an image file containing the startup files in the subdirectory
C_FILES\COMMON and save it on the host computer, type one of the
following commands on the host computer.
If the JANUS 2050 is going to operate in English, type:
make_usa
If the JANUS 2050 is going to operate in a language other than English,
type:
makelang
• To create an image file containing the startup files in the subdirectory
C_FILES\COMMON plus any additional files you specify, type the
following command on the host computer:
makenew {[ path\ ][ filename1 ]
where:
path\ is the drive and directory of the file(s) you want to include in the
image file.
filename is the name of the file(s) you want to include in the image file.
You can specify more than one file or use path\*.* to load all the files
from the specified directory.
2. Once you have typed in one of the MAKE commands, press e . The image
file is saved to the file DRIVEC.IMG on the subdirectory
NEWDRV_C\IMAGE on your host computer.
3. To create another image file, rename the file DRIVEC.IMG. Then repeat
Steps 1 and 2 to create a different image file.
JVMUUsing the JANUS 2050 Software
[ path\ ][ filename2 ]} ...
3
3-19