Intercharacter Delay - Intermec Janus 2050 User Manual

JANUS 2050 Vehicle-Mount Computer User's Manual (4MB)

Intercharacter Delay

Purpose: Defines the amount of time the JANUS 2050 waits before sending each
character to the host. It modifies outgoing data only by slowing the speed of
transmission. A character delay can be useful when communicating with a
controller through modems using full-duplex operation.
Note: You must select the communications port and protocol before setting the
parameters that define the protocol. Refer to the configuration command
"Communications Protocol, Configure" earlier in this chapter for more information on
defining protocols.
Default: 0 sec
Syntax: IDdata
Acceptable values for data are:
0
1
2
3
4
5
6
7
Scan: One of the following labels:
0 ms Intercharacter Delay
*$+ID0*
*$+ID0*
2 ms Intercharacter Delay
*$+ID2*
*$+ID2*
10-52
0 ms
1 ms
2 ms
5 ms
10 ms
20 ms
50 ms
100 ms
39 nugget A
1 ms Intercharacter Delay
*$+ID1*
*$+ID1*
5 ms Intercharacter Delay
*$+ID3*
*$+ID3*